New locks, accurate fitting
Lock Installation in Altona Meadows
Installing a lock on a door that has never had one is a different job to swapping like for like. Nothing is pre-drilled, so every measurement is set on the day — and those measurements determine whether the lock feels solid or becomes a nuisance.
Locksmith Altona Meadows Service installs new hardware on entry doors, internal doors, garage side doors, gates, sheds and windows across Altona Meadows and nearby suburbs.
Where new locks are commonly added
Requests for new installations usually come from a change in how a property is used rather than from a fault.
- A side or rear door that has only ever had a latch
- Gates and side access to a back yard
- Sheds, garages and outdoor storage
- Internal doors for a home office, study or storage room
- Windows on ground level or accessible from a low roof
- A second lock added to an existing entry door
- A newly built, replaced or renovated door
Why accurate preparation matters
A lock is only as good as the hole it sits in. If the cylinder bore is a fraction oversized, the assembly moves under load. If the bolt hole in the frame is not aligned, the bolt drags every time the door is locked. If a mortice is cut too deep, the case is not properly supported.
None of these are dramatic failures on day one. They show up months later as a lock that has become stiff, loose or unreliable — and by then the door has usually been worn as well.
Matching hardware to the door
Before drilling anything we confirm the door can carry the hardware. A lightweight hollow-core door will not support a heavy mortice lock. A narrow aluminium stile limits which cylinders will physically fit. A timber gate exposed to weather needs hardware and fixings that will not seize or corrode within a season.
For businesses, doors on an exit path have egress requirements that must be preserved. Adding a lock to such a door has to keep it operating as an exit.
How an installation runs
We check the door, frame and hinges first, since a door that does not close cleanly will not lock cleanly either. We confirm the hardware position, prepare the door and frame, fit the lock and strike, then test operation from both sides with the door both open and closed.
You get all keys cut for the lock, and we confirm you are comfortable using it before we leave. If we find something during the check that changes the scope — a frame in poor condition, or a door that needs hinge work first — we will tell you before proceeding rather than after.
Renting or managed properties
Adding hardware to a rented property normally needs the owner or managing agent to approve it, and there may be conditions about keys and about returning the door to its original state later. Confirm that before the work is booked.
Request a quote
Ask us about lock installation
Send the details and we will come back to you with what the work is likely to involve. If it turns out you need something different to what you selected, we will tell you.
Prefer to talk it through? Use the call button and describe the door — that is often faster than typing it out.
Talk to a locksmith
Lock installation in Altona Meadows and nearby suburbs
Tell us the property, the door and what the lock is doing. You will be told what the work involves and what it costs before anything starts.
Locksmith Altona Meadows Service
23 Central Ave, Altona Meadows VIC 3028, Australia